DataTrac 3 installation

• Products:
  • DataTrac 3,
  • Continuous Data Loggers,
  • Em50 Digital/Analog Data Logger,
  • Em50G Wireless Cellular Data Logger,
  • ECH2O Utility,
  • ECH2O Utility Mobile,
  • Em50R Wireless Radio Data Logger,
  • Data Loggers and Collectors,
  • Em5b Analog Data Logger

Download DataTrac 3.4

Revision History

Installing DataTrac 3

1. When prompted, enter the required user information and your registration key. If you do not have a key, simply click "Evaluate DataTrac 3."  This option allows you to evaluate DataTrac 3 for 30 days.
2. Follow the on-screen instructions to install DataTrac 3 on your PC. 

Quickstart Guide

Directly Connect to a Logger.

1. Connect your USB cable between COM port on the Decagon data logger and the USB port of your computer.
2. Select the COM port in toolbar.
3. Click connect.

Configure a Logger

1. Once your logger is connected, select Configure in your toolbar.
2. Select your measurement interval.
3. In the Ports section, select the sensor plugged into each port of the data logger.

Download from an Em50G

1. From the Setup menu, select Create New, then Em50G Subscription.
2. Enter the Device ID and password found on the brightly colored card that came inside your Em50G.
3. Click OK. 
4. If you don't have a dataset, feel free to use a sample file. This Em50G is currently installed in an Eastern Washington vineyard. Use the following login information to check it out. (Username: 5GBETA09 Password: lesh-ibid)

Feedback and Bug Requests

We are committed to ensuring the highest level of customer satisfaction to our DataTrac 3 customers. To this end, our development team has made it quick and easy to send your feedback directly us. Simply click on the "Help" menu and then "Send Decagon Feedback." We look forward to hearing your suggestions.