Campbell Scientific Programs for the 5TE, 5TM, and the GS3

• Products:
  • 5TM Soil Moisture Sensor,
  • 5TE Soil Moisture Sensor,
  • GS3 Soil Moisture Sensor,
  • Campbell Scientific Data Logger Programming

Use the programs below as templates for your Campbell Scientific 5TE, 5TM, and GS3 programs.

If you would like assistance writing your Campbell Scientific logger program with your Decagon sensors, visit our Program Writing Service Page for more information on receiving a customized program to meet your research needs. 

File Downloads

• Example SDI12 Program 5TM.CR1 Example SDI-12 Program for the 5TM. Download now.
• Example-GS3-Program-for-CR1000-using-serial-mode.pdf Example program for using the GS3 with the CR1000. Download now.
• AM16325TETOMUXTOCR10XR102.csi Example program for multiplexing the 5TE to the CR10X using a 16/32 multiplexer. Download now.
• 5TEMULTIPLEXERFORCR1000.CR1 Example program for multiplexing the 5TE to the CR1000 using the 16/32 multiplexer. Download now.
• 5TETOCR10XPROG.CSI Example program for using the 5TE with the CR10X. Download now.
• 5TEPROGTOCR1000.CR1 Example program for using the 5TE with the CR1000. Download now.
• 5TE5TMMULTIPLEXCR1000R101.CR1 Second example program for multiplexting the 5TE or 5TM with the CR1000 using a 16/32 multiplexer. Download now.
• Example SDI12 Program_5TE.CR1 Example SDI-12 program for the 5TE. Download now.
• example-SDI12-program-gs3.pdf Example SDI-12 program for the GS3. Download now.