The latest version of the ProCheck (the ProCheck C) includes the ability to calculate and display the average and standard deviation for sequentially collected portable measurements.
Plug in the handheld ProCheck to get a real-time reading from any Decagon sensor*.
During large-scale sensor installations, the ProCheck lets you monitor a sensor's reading as it is installed. Readout values help you detect installation problems (poor sensor to soil contact, air pockets, rocks, etc.) before you repack the hole or trench.
ProCheck can be used to assign SDI-12 addresses to digital sensors (these include the 5TE, 5TM, GS3, MPS-2, and CTD) for easier SDI-12 programming.
ProCheck is most often used to spot-check soil moisture, but it can also instantaneously read any other environmental sensor. Press a button to save up to 5,000 individual readings. Each reading includes sensor type, date, time, raw value, calibrated value, and calibration coefficients.
When reading soil moisture sensors, pick from a list of supplied factory calibrations for both soil and soilless media or input your own calibration. Data stored can be downloaded in EXCEL format using the included software.
A rugged case is available if you plan on using your ProCheck in multiple locations.
*excludes the MAS-1 and EA-10, which are 4-20 mA sensors
Part number 40654
|Input channels:||1 channel|
|Data Storage:||1 MB (5,000 readings)|
ProCheck firmware versions up to 1.5C: All environmental, soil moisture, and water potential sensors sold by Decagon before November 2012
ProCheck firmware versions after 1.5C: All environmental, soil moisture, and water potential sensors sold by Decagon
|Operating Environment:||-5° to 50°C|
|Power Requirements:||4 AA alkaline batteries (typically good for 40 hours of use)|
|Case Dimensions:||15.5 cm x 9.5 cm x 3.3 cm|
|Case Material:||Splash-proof case (NEMA 1, IP20)|
|Interface Cable:||Serial RS232 (cable included)|
|Display:||128 x 64 graphic display|
|Software Interface:||ProCheck Utility|
|Optional Carrying Case:||Tradesman brand carrying case|
|Warranty:||One year, parts and labor|
|Instantaneous Data Collector||Compatible Sensors||Storage Capabilities||Calibration available||Additional capabilities|
|ProCheck FW <1.5C
||All Decagon environmental, soil moisture, and water potential sensors (except for VP-3, ES-2 series, SRS sensors, MAS-1, EA-10)
||1 MB||Mineral soil calibrations, soilless substrate calibrations, custom calibrations||SDI-12 sensor addressing|
|ProCheck FW >1.5C||All Decagon environmental, soil moisture, and water potential sensors (except for MAS-1, EA-10)
||1 MB||Mineral soil calibrations, soilless substrate calibrations, custom calibrations||Statistical analysis of collected data|
|ECH2O Check||10HS, EC-5, ECH2O-10, ECH2O-20||none||Mineral calibrations, custom calibrations||none|
Phone: 800-755-2751 or