Antennas & Cables

4-element Yagi antenna
Quote Request

Antennas:

4-element Yagi antenna (model YAGI-4)
Extends the range of the Em50R logger. 14 in. long w/6bDb gain, 5-foot cable.

10-element Yagi antenna (model YAGI-10)
Extends the range of the Em50R logger. 42 in. long w/12bDb gain, 5-foot cable.

Omni-directional base station antenna (model OMNI-5)
For use with the DataStation or Rm1. 23 in. long w/ 5dBd gain (external cable required).

Magnetic-mount mobile base station antenna (model MMANT)
For mobile reception of Em50R transmissions using the RM-1 radio receiver.

Cables:

All instruments come with a standard 3 meter cable.
ustom lengths and custom ends are available for an additional fee.

Serial cable (model SCA)
Comes standard with an Em50 order, but are available upon request. Connects directly from your PC to the Em50 and Em50R.

50-foot (15m) extension cable (model EXT-50)
Up to 5 cables can be connected to each other without signal loss; heatshrink should be used to waterproof connections.

250-foot bulk cable
Ropel infused to prevent rodent damage.

USB to Serial Adapter
16" inch adapter by IOGEAR© which we have found works more reliably with our products than other adapters. 96 byte buffer, LED status light for data transfer monitoring.

IPAQ to Serial Adapter (Item # 20631)
Connect your IPAQ 2000, 3800, 3900, 4000 or 5000 to a serial device with this 8" 9-Pin DB9 adapter.

DC Car Adapter (model DCPA)
Plugs directly into your car's 12 V power outlet (cigarette lighter) for mobile use of the RM-1. This allows you to travel near your Em50R stations and query their data from your laptop in your car.

Splice Kit (Item # 40588)
Extend, repair, or protect your ECH₂O Sensor Cables.

Miscellaneous Items:

Auger Kit
Quote Request

ECH₂O Sensor Installation Kit (Item # 40597)
For easy installation of long sensors (EC-10, and EC-20). Reduces the risk of sensor damage during placement.

Auger Kit
For use with deep installation of the ECH₂O probes. Includes a regular and sand auger (2.75" [7 cm] diameter), two 2' (0.6 m) extension rods, a standard rubber handle, and a ratchet handle.

Rodent Resistant Cable Armor
Protect your instrument cables from rodents with Cable Armor. Cable Armor surrounds your sensor cables with a rodent-resistant plastic shield. Includes cable shuttle to easily thread your sensor cables..

Remote Outdoor Enclosure
Protects your DataStation from the elements. Includes a weather-proof metal case for the DataStation, Solar Power panels and all mounting hardware. The DataStation, outdoor antenna, and antenna extension cable are sold separately. Refer to the detailed assembly instruction booklet to ensure correct installation.