Measurement: Soil Moisture

GS3 Ruggedized Soil Moisture, Temperature, and Electrical Conductivity

  • Volumetric water content, temperature, and electrical conductivity
  • Epoxy body, stainless steel needles for long life
  • Digital, SDI-12

Watershed Monitoring System

Close Your Water Balance Get closer to completing the water balance equation with this system that helps you nail two tough components: storage and deep percolation. Measure Deep Drainage The Drain Gauge is elegantly designed to make sure water…

EC-5 Lowest Cost Soil Moisture

  • Volumetric water content
  • Lowest cost soil moisture sensor
  • Analog (voltage) output.

Irrigation Monitoring System

Know When to Turn it On Most irrigation systems rely exclusively on soil moisture sensors. However, soil moisture sensors can't tell you how much of the present water is actually available to plants. This system uses an MPS-2 matric potential sensor…

5TM Soil Moisture and Temperature

  • Volumetric water content and temperature
  • Epoxy overmold for long life
  • Digital, SDI-12

5TE Soil Moisture, Temperature, and Electrical Conductivity

  • Volumetric water content, temperature, and electrical conductivity
  • Digital, SDI-12.

Soil Moisture Release Curve Construction

Decagon's Soil Moisture Release Curve service uses UMS tensiometers and the HYPROP to produce the points for the moisture characteristic curve in the wet range, and the WP4C to produce the points in the dry range. Your soil moisture characteristic curve service is specific for the soils that you send to Decagon, and are over the range that you specify.