SK20 SUCTION CUP
The SK20 uses ceramic cups made from Al203 sintered material which allows sampling and analysis for nitrate and common organic and inorganic substances.
Nitrate, chloride, sulphate, calcium, sodium, ammonium, phosphate
Very low dead volume
Shaft and cup exchangeable
pH range of 4 to 9
Not suitable for heavy metals
|SHAFT||Ø 2 cm; Acrylic|
|POROUS CERAMIC||Ø 2 cm; length 6 cm|
|BUBBLE POINT||-100 kPa|
|SUCTION TUBE||PE; Ø 0.16 cm x Ø 0.28 cm|
|PROTECTIVE TUBE||PVC, Ø 1.1 cm|
|ACHIEVABLE SAMPLE AMOUNTS||
Maximum: in free water and with a vacuum of -50 kPa approximately 5 mL per 10 minutes.
Minimum: in sandy loam soil with a vacuum of -50 kPa approximately 5 mL per hour.
|PORE WATER SAMPLER||SK20/SKS20 (Internal Shaft Storage)||SIC20/SICS20 (Internal Shaft Storage)||SPE20/SPES20 (Internal Shaft Storage)|
|SUCTION CUP MATERIAL||Aluminum Oxide Ceramic||Silicon Carbide||Porous PE-Nylon Cup|
||Limited Suitability||Suitable||Suitable after conditioning and sufficient forerun for flushing.|
||Not Suitable||Limited Suitability||Suitable|
|*See Chemical Suitability Chart for more information on chemical suitability.|
|BUBBLE POINT||100 kPa||90 kPa||100 kPa (PE cover only allows water flow up to 20 kPa)|
Auger Kits for Pore Water Samplers and Tensiometer
The cutting edge of the auger has a tapered tip similar to the shape of a Tensiometer or pore water sampler. Thus, the bore hole is large enough to insert the shaft, but the cup will have a tight and perfect fit to the soil.
The not recommendable slurrying of the cup with quartz clay can be avoided.
A divisible auger set includes:
- Cutting edge with tapered tip
- Handle with hammering head
Parts have threaded connection and can be extended with one or more 100 cm extension rods.
- Simplifies installation of shafts
- Avoids slurrying
- Multipart - divisible - extendable
||22 mm dia. x 50 cm||26 mm dia. x 50 cm|
||20 mm dia. x 5.6 cm||24 mm dia. x 5.6 cm|
||1.25 m||1.5 m|
||20 mm dia.||24 mm dia.|
|Extension rod Part no.||TBE-100|
Sampling bottles and storage box
Soil water sampling bottles made of Duran glass, available in three sizes.
- Implosion proof
- Plastic coating as chip guard
- Silicon rubber gasket with two connectors
- Accessory: Clip for upright attachment on walls
In the sampling bottle box up to 6 sampling bottles can be stored.
- The lid is covered with isolating material.
- Latches shut the box securely.
- The suction tubes are led through sealed fittings on the side of the box.
Size: 40 cm x 30 cm x 28 cm
|500 mL bottle||SF-500|
|1000 mL bottle||SF-1000|
|2000 mL bottle||SF-2000|
|Box with lid||SF-Box|